Straight Guide Rod for 6 inch- | Comparsion of Guide Rod Plugs Note: the varing lengths | ||
Recoil Master (see below Dawson, Brazos, Midway ) | |||
Straight Guide Rod (see below) | |||
Tool-Less Guide Rod (see below) | |||
Springs for Recoil Master (see below) | |||
Springs for simple guide rod (see below) | |||
Reverse plug for Tool-Less Guide Rod (see below) | |||
Reverse plug for simple guide rod (see below) | |||
Reverse plug for recoil master (see below) | |||
Issue with different dimension on Dawson Reverse Plug(s) | |||
Dawson's: STI Recoil Master $85.85 Note: all Recoil Master's are made by STI | Dawson Guide Rod (Tool-Less) $69.99 | Dawson Guide Rod Item # 026-1066 $19.95 | |
Note: the lip/gruve that holds the lever in place when cleaning. The spring is NOT included | Machined From One Piece of Aircraft Grade Aluminum.This Guide Rod is not intended to last as long as a steel guide rod. | ||
NOTE Picture NOT COMPLETE, per Daniel 6/10/2014 is complete with take down tool, mine arrived and it was complete with a 6.1lb spring | Item #026-0163 $28.95 Dawson Guide Rod for 5 inch 1911 with Take down hole | ||
Dawson Part# 519-1048 Recoil Master/STI/For All STI 1911, HiCap/5.0' +P, Bull6/10/2014; Sales order number #1063001 | Dawson Tool-Less 1911 Guiderod for Bull Barrel: Part #026-1055 $69.99 | ||
STI Recoil Master. Reduces Recoil - Plain and Simple. The recoil master
is designed for one purpose - to reduce felt recoil. It decelerates the
slide before full stroke with a secondary spring. This allows a softer
felt recoil helping you to shoot faster follow up shots. The light
system is designed for 9 mm and open pistols. The heavy system works
well with 40 SW and 45 ACP. Fits STI 1911 and HiCap. Must be able to
remove the guide rod from the rear of the slide. 5.0" +P, Bull. ------------------ Brazos $85.00 [ link ] NOTE COMPLETE The 5" RecoilMaster guide rod system is used in STIi pistols with a 5-inch slide and either a bushing or bull barrell. The spring weight (light or heavy) pertains to caliber where 9mm and 38 Super pistols use a light Recoilmaster and 40 S&W and 45 ACP pistols use a heavy Recoilmaster. The guide rod system includes a guide rod, guide rod plug, inner and out springs, and a takedown tool. |
DP 1911 & HiCap 5" Bull Barrel Tool-Less Guide Rod 026-1055 | ||
Buffers for the end of the Guide Rod | |||
Reverse Plug $14.25 | |||
Dawson Part# 026-1061 Reverse Plug/DP/For All 1911, HiCap/Full Shoulder | Dawson Part# 026-1061 Reverse Plug/DP/For All 1911, HiCap/Full Shoulder | ||
Notice, there is NO gruve on the left end. See the Tooless plug below | Notice, there is NO gruve on the left end. See the Tooless plug below | ||
Guide Rod (Tool-Less)$ 69.69 | |||
Dawson Part#026-1055 Guide Rod/Tool-Less/DP/For All 1911, HiCap/Full Shoulder w/5' Bull Barrel, Full Shoulder | |||
DP 1911 & HiCap 5" Bull Barrel Tool-Less Guide Rod 026-1055 | |||
Enlarge the image and look at the gruve/lip on the left end of the plug to catch the lever and hold the plug in place when cleaning. | |||
Guide Rod $19.95 | |||
Dawson# 026-1066 Dawson Guide Rod for 5 inch 1911 With Take Down Hole | |||
This Guide Rod is not intended to last as long as a steel guide rod.
It should be inspected and replaced when guide rod head shows excessive
wear. Hey it doesn't cost much, give it a try! | |||
Recoil Master Spring [Light] not Guide Rod springs | |||
Dawson Part# 519-1314 Recoil Spring/STI/For All 1911, HiCap/Recoil Master | |||
5 Pack Light Springs (8lb when I tested them) | |||
Midway Recoil Master $90.00 | |||
The STI Recoilmaster is a complete kit that
produces significant reductions in muzzle climb and recoil. This gives
the shooter more consistent performance and brings the gun back to
point of aim more quickly than convention recoil assemblies. Light
Recoilmaster is for 9mm Luger and 38 Super, while the Heavy is for 40
S&W, 10mm Auto and 45 ACP. Both include a takedown tool. Requires
installation by a qualified gunsmith. |
Reverse Plug Dimension Vary (pdf file of notes) | |||||
(A) Length | (B) Upper Diamerter | (C) Lower Diameter | (D) Internal Diameter | ||
#1 is from Grand Master gun Purchased from Dawson | 1.646 | 0.494 | 0.532 | 0.335 | |
#2 is Item #026-1061 purchased with the help of a Dawson Salesman | 1.703 | 0.496 | 0.536 | 0.310 | |
#3 is - item@ 519-1048 purchased with the help of a Dawson salesman | 1.703 | 0.494 | 0.534 | 0.339 |
Questions:
1- Why are the Dawson Precision parts #2,#3 longer than the parts created by STI? 2- The upper diameter of Dawson replacement parts are not consistent as noted in the single reverse plug vs. the complete recoil master kit. 3- The lower diameter of the three plugs are each different with the questionable variation in the separate reverse plug. 4- DP Tool-less Guide-Rod Problem: Weeks later they send the correct parts. Delivered-To: chuck@allthehowards.com
Date: Wed, 18 Jun 2014 11:21:22 -0500 From: Dawson Precision <tech@dawsonprecision.com> Chuck, Two of the three plugs that you are asking about are made by STI, so I can
not answer the question regarding differences in their dimensions.
026-1061 is made by Dawson Precision, and we hold are dimensions to +/-
.001 of our design. We have our own design specs which will be different from
those of STI, so there will be a small difference. The difference is not enough
to worry about as the products work as they should. If you have any further
questions, please feel to contact us. Daniel
Tech Department
Dawson Precision
866-300-1911
|