Taran Base Pad Info. my Notes

Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.

As used by World and National Pistol and 3-Gun Champions: Rob Leatham, Max Michel, Shane Cooley, Travis Tomasie, Blake Miquez, Jessie Duff, Nils Jonasson, Chris Tilley, JJ Ricaza, Manny Bragg, Shannon Smith, Daniel Horner, Keith Garcia, Mike Viogt, Maggie Reese, Dave Pruitt, Phil Strader, Mike Seeklander and Ron Avery, Bennie Cooley.

3G2 for all INFINITY 9mm/38sup 140mm tube with TTI spring and follower will hold 23+1 and INFINITY 170mm will hold 29+1 ( May require tuning for $20, some mags may vary in length ).

Also fits on the Rescomp 140mm 40S&W mag-tube to get 21-22 rounds while fitting the gauge with ease.

The 3G2 fits the gauge with far more clearance than the 3mm, while retaining the strength of the 3mm.

This basepad is a must-have for the INFINITY and STI 170mm magazines to be legal for the upcoming IPSC World Shoot, as well as any other international competitions. No other basepad gives you this much gauge clearance while retaining the maximum capacity. It's a game changer!

This patented push pin design is durable and will not come off until you are ready to remove it. With a one-piece construction made from solid billet-aluminum that will not break or come loose, this essential piece will not die on you in the heat of competition. Ask the Super-Squad!

This base pad allows the magazine to be disassembled in a few seconds with one hand and no tools. You don’t have to worry about losing small parts or using specialty tools to disassemble it. Feel free to drop mags equipped with this base pad in any shooting environment. They don’t crack when dropped on concrete or rocks and they don’t have moving parts to get jammed up with dirt and debris.

3mm for SV/SPS/Rescomp 140/170mm magazines
· Rescomp 21rds in 140mm 40S&W
· 23rds in 140mm 38/9mm
· 29-30rds in 170mm 38/9mm

4mm for STI/SPS/Rescomp 140/170mm tubes
· 20rds in 140mm 40S&W
· 24rds in 140mm 38/9mm
· 29-30rds in 38/9mm
*4mm is recommended for all STI tubes

4G for all SV 140mm 40S&W old and new style tubes
· possible 21rds in 140mm 40S&W
*4G (4 the Gauge) is recommended for anyone doing mag tuning who has a USPSA mag gauge. The 4G is angled in the back and will fit the gauge while allowing one extra round over the 3mm. It’s the base pad that all the mag tuners have been waiting for to get that extra edge!

7mm for 140mm Open mags and 126mm Open or Limited mags, or older under length Infinity Big Sticks
· 24rds in SV/STI 140mm 38/9mm
*This is preferred base pad for non-big stick tubes in Open division to get 23-24rds without extending the mag too long where it’s awkward to do fast reloads.

7mm for SPS 134/164mm 38/9mm and 40S&W
· 30rds in 164mm 38/9mm
· 23rds in 134mm 38/9mm
· 21rds in 134mm 40S&W

*Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.

The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.

This Patented push pin design is indestructible and will not come off until you are ready to remove it. One Piece construction made from solid aluminum, will not break or come loose, which is essential in the heat of competition.

This base pad allows the magazine to be disassembled in seconds with one hand and no tools. You don’t have to worry about losing small parts or specialty tools to disassemble it. Feel free to drop mags equipped with this base pad in any shooting environment.

They don’t crack when dropped on concrete or rocks and they don’t have moving parts to get jammed up with dirt and debris. It’s simple, the TTI Pad doesn't crack, it’s easy to get on and off the mag, and it gets the highest capacity possible. It's the last base pad you will ever buy.

The new TTI base pads have been redesigned with a wider notch to fit onto all the magazines without having to grind down the tube’s bottom lips like in the past.

As used by World and National Pistol and 3-Gun Champions! Rob Leatham, Max Michel, Shane Cooley, Travis Tomasie, Blake Miquez, Jessie Duff, Nils Jonasson, Chris Tilley, JJ Ricaza, Manny Bragg, Shannon Smith, Daniel Horner, Keith Garcia, Mike Viogt, Maggie Reese, Dave Pruitt, Phil Strader, Mike Seeklander and Ron Avery, Bennie Cooley.

Available in 3G, 4G2, and 7G 3G for SV/SPS/Rescomp 140/170mm magazines.

· Rescomp 21rds in 140mm 40S&W · 23rds in 140mm 38/9mm.

· 29-30rds in 170mm 38/9mm 4G2 for STI/SPS/Rescomp 140/170mm tubes.

· 20rds in 140mm 40S&W · 24rds in 140mm 38/9mm.

· 29-30rds in 38/9mm 4G2 for all SV 140mm 40S&W old and new style tubes.

· possible 21rds in 140mm 40S&W *4G2 (4 the Gauge) is recommended for anyone doing mag tuning who has a USPSA mag gauge.

The 4G is angled in the back and will fit the gauge while allowing one extra round over the 3mm. It’s the base pad that all the mag tuners have been waiting for to get that extra edge!

7G for 140mm Open mags and 126mm Open or Limited mags, or older under length Infinity Big Sticks.

· 24rds in SV/STI 140mm 38/9mm *This is preferred base pad for non-big stick tubes in Open division to get 23-24rds without extending the mag too long where it’s awkward to do fast reloads.

7G for SPS 134/164mm 38/9mm and 40S&W.

· 30rds in 164mm 38/9mm.

· 23rds in 134mm 38/9mm.

· 21rds in 134mm 40S&W *Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.

Notes - Taran Base Pads

Updated 5/21/2016

Taran Tactical Base Pads- 3G2 STI/SV

Taran Tactical Base Pads- 3G2 STI/SV or http://tarantacticalinnovations.com
Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity. As used by World and National Pistol and 3-Gun Champions: Rob Leatham, Max Michel, Shane Cooley, Travis Tomasie, Blake Miquez, Jessie Duff, Nils Jonasson, Chris Tilley, JJ Ricaza, Manny Bragg, Shannon Smith, Daniel Horner, Keith Garcia, Mike Viogt, Maggie Reese, Dave Pruitt, Phil Strader, Mike Seeklander and Ron Avery, Bennie Cooley. 3G2 for all INFINITY 9mm/38sup 140mm tube with TTI spring and follower will hold 23+1 and INFINITY 170mm will hold 29+1 ( May require tuning for $20, some mags may vary in length ). Also fits on the Rescomp 140mm 40S&W mag-tube to get 21-22 rounds while fitting the gauge with ease. The 3G2 fits the gauge with far more clearance than the 3mm, while retaining the strength of the 3mm. This basepad is a must-have for the INFINITY and STI 170mm magazines to be legal for the upcoming IPSC World Shoot, as well as any other international competitions. No other basepad gives you this much gauge clearance while retaining the maximum capacity. It's a game changer! This patented push pin design is durable and will not come off until you are ready to remove it. With a one-piece construction made from solid billet-aluminum that will not break or come loose, this essential piece will not die on you in the heat of competition. Ask the Super-Squad! This base pad allows the magazine to be disassembled in a few seconds with one hand and no tools. You don’t have to worry about losing small parts or using specialty tools to disassemble it. Feel free to drop mags equipped with this base pad in any shooting environment. They don’t crack when dropped on concrete or rocks and they don’t have moving parts to get jammed up with dirt and debris. 3mm for SV/SPS/Rescomp 140/170mm magazines · Rescomp 21rds in 140mm 40S&W · 23rds in 140mm 38/9mm · 29-30rds in 170mm 38/9mm 4mm for STI/SPS/Rescomp 140/170mm tubes · 20rds in 140mm 40S&W · 24rds in 140mm 38/9mm · 29-30rds in 38/9mm 4mm is recommended for all STI tubes 4G for all SV 140mm 40S&W old and new style tubes · possible 21rds in 140mm 40S&W 4G (4 the Gauge) is recommended for anyone doing mag tuning who has a USPSA mag gauge. The 4G is angled in the back and will fit the gauge while allowing one extra round over the 3mm. It’s the base pad that all the mag tuners have been waiting for to get that extra edge! 7mm for 140mm Open mags and 126mm Open or Limited mags, or older under length Infinity Big Sticks · 24rds in SV/STI 140mm 38/9mm This is preferred base pad for non-big stick tubes in Open division to get 23-24rds without extending the mag too long where it’s awkward to do fast reloads. 7mm* for SPS 134/164mm 38/9mm and 40S&W · 30rds in 164mm 38/9mm · 23rds in 134mm 38/9mm · 21rds in 134mm 40S&W Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge. The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity. This Patented push pin design is indestructible and will not come off until you are ready to remove it. One Piece construction made from solid aluminum, will not break or come loose, which is essential in the heat of competition. This base pad allows the magazine to be disassembled in seconds with one hand and no tools. You don’t have to worry about losing small parts or specialty tools to disassemble it. Feel free to drop mags equipped with this base pad in any shooting environment. They don’t crack when dropped on concrete or rocks and they don’t have moving parts to get jammed up with dirt and debris. It’s simple, the TTI Pad doesn't crack, it’s easy to get on and off the mag, and it gets the highest capacity possible. It's the last base pad you will ever buy. The new TTI base pads have been redesigned with a wider notch to fit onto all the magazines without having to grind down the tube’s bottom lips like in the past. As used by World and National Pistol and 3-Gun Champions! Rob Leatham, Max Michel, Shane Cooley, Travis Tomasie, Blake Miquez, Jessie Duff, Nils Jonasson, Chris Tilley, JJ Ricaza, Manny Bragg, Shannon Smith, Daniel Horner, Keith Garcia, Mike Viogt, Maggie Reese, Dave Pruitt, Phil Strader, Mike Seeklander and Ron Avery, Bennie Cooley. Available in 3G, 4G2, and 7G 3G for SV/SPS/Rescomp 140/170mm magazines. · Rescomp 21rds in 140mm 40S&W · 23rds in 140mm 38/9mm. · 29-30rds in 170mm 38/9mm 4G2 for STI/SPS/Rescomp 140/170mm tubes. · 20rds in 140mm 40S&W · 24rds in 140mm 38/9mm. · 29-30rds in 38/9mm 4G2 for all SV 140mm 40S&W old and new style tubes. · possible 21rds in 140mm 40S&W 4G2 (4 the Gauge) is recommended for anyone doing mag tuning who has a USPSA mag gauge. The 4G is angled in the back and will fit the gauge while allowing one extra round over the 3mm. It’s the base pad that all the mag tuners have been waiting for to get that extra edge! 7G for 140mm Open mags and 126mm Open or Limited mags, or older under length Infinity Big Sticks. · 24rds in SV/STI 140mm 38/9mm This is preferred base pad for non-big stick tubes in Open division to get 23-24rds without extending the mag too long where it’s awkward to do fast reloads. 7G for SPS 134/164mm 38/9mm and 40S&W. · 30rds in 164mm 38/9mm. · 23rds in 134mm 38/9mm. · 21rds in 134mm 40S&W Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.	$33.99