Notes - Issues/Reminders with my Dillon XL650
2014
1- Powder Spills -
Dillons says
to tighten the wing nut on the powder linkage - notice in the video's
they do not follow their own advice.
But, it did
help me. The problem is, each time I change my ammo caliber, I have to
recheck the spring, because the new
caliber seems to cause the linkage spring to change and require adjustment.
2- High Primers -
3- Deprimmer stage fails to remove the primer ( see notes and pictures of why! )
4- Need to lubricate the press and parts that touch or move.
5- Upside down cases from CASE FEEDER
6- When I use the Quick Change to alter the caliber of round I am making - what do I need to review/update?
7- Adjusting the Primer Loading stage lever (using the threaded screw in the side ..... )
1- Powder Spills | . | . | . |
2- High Primers | . | . | . |
3-depriming and friendly 22 cases | | | |
4-Lubricate | . | . | . |
5- Upside down cases | . | . | . |
6- Quick Change Reminders | Check the Wing Nut on Linkage Bar. Clean Powder Bar Use some silicon on moving parts of powder container | ReCheck the OAL. | ReCheck the Powder Load. |
Copyright © 2014 CJC3 Handgun Training. All rights reserved.
WebMaster
Suggestions
TO: